I have been using the Ring Doorbell for a long time, but from some days, I have noticed an irregular blinking pattern of the blue light.
I do not know why the Doorbell is behaving like that; it tries to communicate or send error messages through the blue light.
This article is basically about all this blinking pattern of lights in the Ring Doorbell. We will discuss all the necessary information related to the blinking pattern of lights in the Doorbell.
There are several different colors of light used in the Doorbell, and all are used for different purposes. So, let us discuss the complete guide in detail.
Reason Behind Ring Doorbell Flashing Blue
Ring Doorbell uses circular notification lights of different colors for communication and sending messages. There are several reasons behind the blue light’s flashing, such as it may be trying to connect to the Wi-Fi, etc.
- 1080p HD video doorbell with enhanced features that let you see, hear, and speak to anyone from your phone, tablet, or PC.
- An upgrade from the original Ring Video Doorbell 2, enjoy improved motion detection, privacy zones and audio privacy, and dual-band (2.4 or 5.0 GHz) wifi connectivity.
- Receive mobile notifications when anyone presses your doorbell or triggers your built-in motion sensors.
- Powered by the rechargeable battery pack or connects to doorbell wires for constant power.
- Easily setup by connecting your Ring Video Doorbell 3 to wifi through the Ring app and mounting with the included tools.
Primary Meanings for a blue Right Doorbell light
There are different variations in the circular light’s flashing like an unbroken, half-filled circle or randomly moving light, etc.
Spinning Blue Light – When someone at the door rings the Doorbell, then a Spinning Blue light occurs, which helps you notify the potential call.
Solid Blue Light – This occurs when you answer a regular call or when you connect the Ring app to the device. It is used for the indication that the speaker is turned on.
Upward Moving Blue Light – This upward movement of the Blue light occurs when the Ring Doorbell is trying to connect to the Wi-Fi network. If this movement occurs randomly, then the Doorbell is trying to connect to the network.
Flashing Blue Light – Then Alternate switching between on and off blue light for 1 sec occurs during the ring doorbell’s booting process. If the flashing of light does not stop blinking, then your Ring Doorbell might be stuck in a boot loop.
Blue Light flash Four times – Blinking four times of the blue light indicates that the Ring Doorbell has been set up correctly.
Flashing of Blue light then white – This series of blinking light indicates that you have successfully reset your Ring Doorbell device.
Ring Doorbell Flashing White?
Sometimes, the Ring Doorbell starts blinking of white color, which indicates that either the device battery is low or it has lost the Wi-Fi connection and is trying to reconnect again. The solid white color on the Ring doorbell indicates that the device is getting enough power and is working correctly.
Some of the other possibilities behind the blinking of white light are:
- Low Voltage supply
- Wi-Fi disconnected
- Loose router wire
- Power Oversupplied
How to Reset a Ring Doorbell?
Suppose you face any issue with the Ring Doorbell, like the Wi-Fi disconnected automatically or any software/hardware issue. Resetting the device to its factory settings is one of the quickest and easiest ways to fix it.
Step 1: You must look for an orange button at the back of the Doorbell and must press it for at least 15 seconds.
Step 2: Then, your device will restart, and you will see a flashing right in the front.
Ring Doorbell Not Ringing? What to do?
If your Ring Doorbell is stopped ringing suddenly, then there are either two causes; there are some issues with the speaker or the microphone getting detached from the device.
You must check in the Ring application on your smartphone and try to enable the microphone option. If it does not get fixed, then you must buy a new microphone.
How to Reset a Ring Doorbell to Disconnect Your Account?
If you are giving your Ring Doorbell to another user, you must remove the doorbell account form the device so that the new user can set up his account and manage the Doorbell.
Step 1: Firstly, you must open your Ring app and tap the Ring Doorbell you want to disconnect.
Step 2: Then, tap the settings icon, which can be found on the upper right corner of the application.
Step 3: Then, select the option “Remove Device” and confirm the device removal.
Step 4: Then, click on the delete button for the successful deletion of ac
We have discussed all the primary outcomes resulting in the blinking of blue light in detail and the step-by-step process of resetting the device and removing the user’s account from the device.
If you find this article useful, do not forget to share it once, and if you have any doubts/questions regarding the topic, do not forget to paste it in the comment section below. We will try our best to solve all your queries.
Write for us
Are you an expert in Home IoT devices or home decor/Improvement? Check our write for us Page, to learn how you can become a Storyteller and publish a 500-word article on EmptyLightHome.